Glass grinding belts 3300 x 100 mm
German quality brand
Silicon carbide abrasive on very sturdy polyester or cotton fabric carrier. CK721X is characterized by a high cutting ability and a fine microsection and is also oil and water resistant.
German quality brand
Silicon carbide abrasive on very sturdy polyester or cotton fabric carrier. CK721X is characterized by a high cutting ability and a fine microsection and is also oil and water resistant.
Related products
-
-
Machine Tools, Abrasive belts
Cork polishing belt for high gloss polishing
Special product for polishing glass with high-quality cork / synthetic resin coating – Long service life with consistent polishing effect – Waterproof Cork sanding belts for edge polishing finish for high-gloss edges. For best results, we recommend pre-grinding with silicon carbide abrasive belts grit size 400, 800 or 1000. The finer the Grit, the Glossier after the cork polishing. Before using, gently grind or peel cork band with thick glass to avoid edge splits.
SKU: 100.450.265-1 -
Machine Tools, Drilling, H75mm Drill
Diamond hollow drill 1/2″ H75 mm D 51mm to D60mm
The Diamond hollow drill 1/2″ H75 mm D 51mm to D60mm is a standard diamond bur 75mm high with 1/2 “thread, for normal use. With internal cooling, base material: steel, diamond coating of sintered material, drill must be sharpened before first use. Made in Italy. HS code for reference: 8207.
SKU: n/a -
Machine Tools, Drilling, H75mm Drill
Diamond hollow drill 1/2″ H75 mm D 11mm to D 20mm
The Diamond hollow drill 1/2″ H75 mm D 11mm to D 20mm drill is a standard diamond bur that is 75mm high with a 1/2″ thread. It is made of steel with a diamond coating of sintered material. The drill must be sharpened before first use. It is made in Italy and has an HS code of 8207.
SKU: n/a -
Machine Tools, Drilling, H75mm Craftline-Drill
Craftline diamond hollow drill 1/2 “H 75 mm D61 to D70
Machine Tools, Drilling, H75mm Craftline-DrillCraftline diamond hollow drill 1/2 “H 75 mm D61 to D70
Craftline Diamond Core Drill 75mm high with 1/2 “thread.
– with internal cooling
– For normal use
– Base material: steel
– Diamond coating of sintered material
– The drill must be sharpened before first use
– Made in ChinaSKU: n/a
